A controller for Piezo Stage driving control.
With integral control circuit, driver and displacement sensor amplifier, the controller is directly connected with the Piezo Stage to control the closed loop.
High-precision positioning without hysteresis and creeping is possible.
Interface
Position input interface
analog input (standard equipment)
Analog voltage of 0 to 10V is input to perform positioning.
digital input (option)
Serial or parallel interface is also available as an option.
Line Up
| Single-axis |
- Light and compact
- Reasonable price
- Three options of control interface
| Series | 6000 | 7000 |
|---|---|---|
| Model No. | NCS61□□C | NCS71□□C |
| Number of control axes | 1 | 1 |
| Feedback control type | PI analog | PID analog |
| Input interface (Standard equipment) |
Analog voltage(0 ～ 10V) | Analog voltage(0 ～ 10V) |
| Input interface (Additional option) |
Serial or Limited-function serial or Parallel | |
| Output current (General-purpose type) |
Average current 40mA, Peak current 120mA, Output ripple noise 5mVp-p |
|
| Output current (Low-noise type) |
Average current 60mA, Peak current 500mA, Output ripple noise 1mVp-p |
|
| Monitor output | Sensor monitor, Piezo monitor, differential signal | |
| Protective circuit | Shut-off of output from piezo-electric element by overheat protective circuit | |
| Power supply | AC100～120V / AC200～240V | |
| Power consumption | 50VA | |
| Dimensions | W87.5×D365×H135.8 mm | |
| Weight | 2.7 kg | |
| CE Marking | ○ | |
| RoHS | ○ | |
| Multi-axes |
- Slot for axes 1-3 are prepared
- Axis can be added later
- Cost less than 3 single-axis units
| Series | 6000 | 7000 |
|---|---|---|
| Model No. | NCM6□□□C | NCM7□□□C |
| Number of control axes | 1～3 Axes | 1～3 Axes |
| Feedback control type | PI analog | PID analog |
| Input interface (Standard equipment) |
Analog voltage(0 ～ 10V) | Analog voltage(0 ～ 10V) |
| Input interface (Additional option) |
Serial | |
| Output current (General-purpose type) |
Average current 40mA, Peak current 120mA, Output ripple noise 5mVp-p | |
| Output current (Low-noise type) |
Average current 60mA, Peak current 500mA, Output ripple noise 1mVp-p | |
| Monitor output | Sensor monitor, Piezo monitor, differential signal | |
| Protective circuit | Shut-off of output from piezo-electric element by overheat protective circuit | |
| Power supply | AC100～120V / AC200～240V | |
| Power consumption | 100VA | |
| Dimensions | W236×D388×H140 mm | |
| Weight | 5.4 kg | |
| CE Marking | ○ | |
| RoHS | ○ | |
Composition of model No.
