Overview
CLE-160 TX/RX is cable extender for CameraLink Base Configuration that enable image transfer and camera control up to 300m by optical fiver cable transfer(multi mode). It also supports PowerOverCameraLink(PoCL).
Features
– Camera control from remote location by two-way communication.
– Correspond to the clock frequency of 85MHz or less.
– Clock signal quality is improved by jitter cleaner function, it realized stable image data transfer even by cameras with large clock jitter.
– PoCL compliant/no compliant is switchable with DIP SW of the bottom on unit TX/RX.
– Correspond to the clock frequency of 85MHz or less.
– Clock signal quality is improved by jitter cleaner function, it realized stable image data transfer even by cameras with large clock jitter.
– PoCL compliant/no compliant is switchable with DIP SW of the bottom on unit TX/RX.
Specifications
Items CLE-160 TX/RX
CameraLink connecter MDR/SDR
CameraLink connecter MDR/SDR
CameaLink CameraLink Base
Input/Output signal Configuration compliant
Optical input/output Optical serial date signal input/output
connector:LC-Duplex
Optical fiver two-core
Input CLK frequency MAX 85MHz
Serial communication SerTC, SerTFG (CameraLink compliant)
Power supply DC 12V (with attached AC adapter)
Temperature/Humidity 0°C-40°C, 0%-80% (no condensation)
Size (except outshoot) 90(W)x25(H)x125(D) mm
Weight 0.5kg(TX,RX)
Accessories AC adapter x 1, Instruction manual x 1
Temperature/Humidity 0°C-40°C, 0%-80% (no condensation)
Size (except outshoot) 90(W)x25(H)x125(D) mm
Weight 0.5kg(TX,RX)
Accessories AC adapter x 1, Instruction manual x 1
* Product appearance and specifications are subject to change without notice.
